Skip to content

Send & Verify Studies

Transmit studies to the RadReport AE Title and confirm they appear in Companion Mode.

  • Guide 23 of 24
  • 8 steps
  • Updated July 3, 2026
All RadioView.AI™ guides
  • Guide 23 of 24
  • 8 steps
  • Updated July 3, 2026

Sending Studies from Your PACS

  1. From your PACS, select the studies you wish to send to RadioView.AI.
  2. Use your PACS's "Send" or "Export" functionality to transmit the selected studies to the RadioView.AI AE Title: RadReport.
  3. If auto-routing rules are configured, new studies matching your criteria will be sent automatically.
  4. Allow a few moments for data processing. Verify successful transfers by checking the "Studies" tab.

Verifying Studies in RadioView.AI

  1. Navigate to the "Companion Mode" tab in the left-hand navigation panel.
  2. The studies you sent from your PACS should start populating in this section.
  3. If studies do not appear immediately, wait a few moments, refresh the page if necessary, and verify the integration was configured correctly.
  4. Once studies appear in Companion Mode, the integration is working properly.

Note

What is the RadioView.AI Direct Connection? This optional feature provides a faster way for radiologists to access and report on studies already stored in the RadioView.AI platform without needing to configure DICOM transfers or complex PACS integration. Use this when you want immediate access to existing studies without transferring data between systems.

NextProfile, Support & Feedback